| Model |
| Output | DC Output | As per Requirement |
| Rated Current | As per Requirement |
| Ripple and Noise Note 2 | 80mV |
| Working Temp Range | -20 to 50 oC |
| Voltage ADJ. Range | +10% of rated output voltage |
| Voltage Accuracy | +2.0% |
| Input | Voltage Range | 110Vac~400Vac |
| Frequency Range | 47Hz~63Hz |
| Inrush Current (Typical) | 130% of rating |
| Protection | Over Power | 105%~150% of rated output current, hiccup mode,Constant power |
| Over Current | 105%~150% of rated output current, hiccup mode,Constant current |
| Over Voltage | 105%~150% of rated output voltage, Constant Voltage ,re-power on to recover |
| Shorted Circuit | Long-term mode, auto recovery |
| Environment | Operating amb. Temp. & Hum. | -20 to 50 oC |
| Storage Temp. & Hum. | 10%~95%RH No condensing |
| Safety & EMC | Safety Standards | UL60950-1; EN60950-1: 2006 |
| Withstand Voltage | 600VAC for 60 sec. |
| Isolation Resistance | 5 to 100M ohms |
| EMI Conduction&Radiation | Compliance to EN55022(CISPR22) Class B |
| Harmonic Current | Compliance to EN61000-3-2,-3 |
| EMS Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11;ENV50204,light industry level,criteria A |
| Others | MTBF (MIL) | Mil grade |
| Dimension (L*W*H) | Depending on rating requirement |
| Packing | Cardboard packeging |
| Cooling method | Cooling by free air convection |
| Note | 1. All parameters NOT specially mentioned are measured at rated input, rated load and 25% of ambient temperature. 2. Measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1 uF & 47uF parallel capacitor. 3. The SPS is considered a component which will be installed into final equipment. The equipment must be re-confirmed that it still meets EMC directives. |
Send Inquiry
Send Inquiry
